3.5 SPREAD 9/16 BOLT 2" TUBE BUSHING ASSEM

These run a 9/16" bolt and the interior sleeves are sized for it, set up for 2" tube with a 3.5" spread. The OD sleeves are 0.25" wall DOM, so they're meant to weld into that tube.

You get two OD bushing sleeves (0.25" wall DOM with zerk fittings), four high durometer poly bushings, and two zinc coated interior sleeves for the 9/16" bolt. It ships to you as a complete assembly ready to set up on your shackles and hangers.

Yeah, these are made to mate right up with DIY shackles and hangers for the perfect leaf spring combo, and they're ideal for rear leaf spring shackles. If you're running something else and not sure it'll line up, shoot us an email and we'll help you sort it out.

The 3.5 SPREAD 9/16 BOLT 2" TUBE BUSHING ASSEM is $52.00.

The 3.5 SPREAD 9/16 BOLT 2" TUBE BUSHING ASSEM is offered through the DIY Off Road marketplace, featuring cut-file designs from fabricators including All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Bushing Packs plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Bushing Packs category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including Bushing Packs, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.