05+ Tacoma 2WD RACE Kit from JRT-Fab (CAD File)
Frequently Asked Questions
This race kit is drawn up for the 05+ 2WD Tacoma specifically. If you're running a 4x4 shoot us an email and we'll see if JRTfab has a file that fits your build.
You're getting the digital files so you can have the plates cut and bent yourself, either the DXF cut files or the solid CAD. Nothing physical ships, you run them on your plasma/laser/waterjet and press the bends.
This kit includes plates that get cut and then bent on a press, so some pieces need bending after they come off the table. If you don't have a press, email us and we can recommend a shop to cut and bend them for you.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 05+ Tacoma 2WD RACE Kit from JRT-Fab (CAD File) is $3,000.00.
This 05+ Tacoma 2WD RACE Kit from JRT-Fab (CAD File) is brought to you by JRTfab. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, Master Fab, Mc Will Manufacturing, OffroadCAD-Models, Superioroffroaddesigns and Velocity Fab. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for 05+ 2wd Tacoma LT-Kit Solid (CAD) Files from JRT FAB plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 05+ 2wd Tacoma LT-Kit Solid (CAD) Files from JRT FAB category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across 05-15 Toyota Tacoma, including 05+ 2wd Tacoma LT-Kit Solid (CAD) Files from JRT FAB, all designed by working fab shops. Browse the 05-15 Toyota Tacoma section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.