Nissan Xterra 2nd Gen (05-15) Rock Slider Build Plans

These are drawn up for the 2nd gen Xterra, 05-15. If you're on a 1st gen or aren't sure where your year lands, shoot us an email and we'll see if these will work for your build.

It's a digital download — you get the cut files after payment, nothing physical ships. You take the DXF to a shop or run them on your own plasma/laser/waterjet, then weld them up.

If you've got a plasma, laser, or waterjet table you can run them yourself. No table? Email us and we'll point you to a shop that can cut them for you.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The Nissan Xterra 2nd Gen (05-15) Rock Slider Build Plans is $30.00.

This Nissan Xterra 2nd Gen (05-15) Rock Slider Build Plans is brought to you by Blackwidowgear. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Nissan Xterra plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Nissan Xterra category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Vehicle Specific Components, including Nissan Xterra, all designed by working fab shops. Browse the Vehicle Specific Components section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.