King Shock 3" Piggyback Coilover Mega Wrench from Towers Motorsport
This tool is designed for servicing the King Shocks 3" piggy back shot top. The billet machined wrench can woth with either a 3/4" driver or use the provided 3/16" thick tabs to build your own handle.
The provided plates allow for you to build a handle to your specific length from 1.5" diameter tube.
Shipped with gunmetal grey anodize and two 3/16" handle plates like shown.
Sold by Towers Motorsport, Manufactures of race car platforms.
Frequently Asked Questions
This one's machined specifically for servicing the King 3" piggyback shock top, so that's what it's confirmed for. If you've got a different King setup you're trying to service, shoot us an email and we'll let you know if it'll work for you.
You can run it either way — it works with a 3/4" driver right out of the box, or you can use the two 3/16" tabs that come with it to build your own handle from 1.5" diameter tube to whatever length you want.
It ships as the billet machined wrench in gunmetal grey anodize plus the two 3/16" handle plates like you see in the photos. You'd just supply your own 1.5" tube if you want to weld up a handle.
The King Shock 3" Piggyback Coilover Mega Wrench from Towers Motorsport is $110.50.
This King Shock 3" Piggyback Coilover Mega Wrench from Towers Motorsport is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for TOOLS plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the TOOLS category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including TOOLS, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.