IRC Dual Master Single Pedal Assmebly
These setups are desigend around the 78 and 79 series matsters from Tilton, these are sold seperately and not included in the assembly.
Each Assembly come with the following.
-Pedal with adjustable feet.
-Main mounting assembly
-Mounts for the master cylinders with spacers.
-Three different ratio master mounts for three different ratios and throws.
-All hardware for the assmebly with springs.
Shipping is not included in product cost. Shipping is an additional cost calculated based on location and product weight / dimensions. Local pickup available in Murrieta, CA.
For shipping cost estimate, please email [email protected]
Frequently Asked Questions
The masters are sold separately and not included. This setup is designed around the Tilton 78 and 79 series masters, so you'll need to grab those on your own to run it.
Yeah, it comes with three different ratio master mounts so you can run three different ratios and throws. The pedal also has adjustable feet to dial it in.
Each assembly comes with the pedal with adjustable feet, the main mounting assembly, the master cylinder mounts with spacers, the three ratio master mounts, and all the hardware including springs. Just remember the masters themselves aren't included.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The IRC Dual Master Single Pedal Assmebly is $1,600.00.
This IRC Dual Master Single Pedal Assmebly is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for IRC Brake Components and Pedal Assemblies plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the IRC Brake Components and Pedal Assemblies category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including IRC Brake Components and Pedal Assemblies, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.