Dodge Ram 1500/2500/3500 (2010-current) Rear Bumper
| Seller | TEKK Consulting |
|---|
Specifications
| Platform | Dodge Ram 1500/2500/3500 |
|---|---|
| Part Family | Bumpers / Tire Carriers / Winch Inserts |
| Position | Rear suspension |
Frequently Asked Questions
The cut files are designed for the Dodge Ram 1500/2500/3500 from 2010 to current, so all three should be covered. If you've got an older Ram or you're unsure about your year, shoot us an email and we'll make sure the file works for your build.
We don't have a specific thickness called out for this one in the file info. Email us and we'll get you the recommended material and gauge so it welds up right on your Ram.
This is a digital download — you get the DXF cut files after payment, then have them cut on a plasma, laser, or waterjet, bend as needed, and weld it up yourself. If you need a shop to cut or bend it, email us and we'll point you to one we trust.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Dodge Ram 1500/2500/3500 (2010-current) Rear Bumper is $65.00.
This Dodge Ram 1500/2500/3500 (2010-current) Rear Bumper is brought to you by Blackwidowgear. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Fabricated Bumpers plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Fabricated Bumpers category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Bumpers, Frame Horns, and Body Mounts, including Fabricated Bumpers, all designed by working fab shops. Browse the Bumpers, Frame Horns, and Body Mounts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
