DIY I-BEAM UPRIGHT SPACER (4 PAck)
These spacers aer designed for the DIY I beam Upright Packs that utilize 1.25" rod ends on either the top or top/bottom of the uperight.
Frequently Asked Questions
Yep, these are made for the DIY I-beam upright packs running 1.25" rod ends on the top or top and bottom of the upright. If you're running a different size rod end, shoot us an email and we'll see what fits your setup.
This is a 4-pack, so you get four spacers shipped to you. That covers the top or top/bottom rod end setups on the DIY I-beam uprights.
These ship to you as finished physical parts, no machining needed on your end. For shipping cost and timing just check at checkout or email us if you've got questions.
The DIY I-BEAM UPRIGHT SPACER (4 PAck) is $16.00.
The DIY I-BEAM UPRIGHT SPACER (4 PAck) is offered through the DIY Off Road marketplace, featuring cut-file designs from fabricators including All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for DIY I-BEAM UPRIGHT SPACER plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the DIY I-BEAM UPRIGHT SPACER category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including DIY I-BEAM UPRIGHT SPACER, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.