3.5 INCH LOW PRO LEAF SPRING PERCH
***This product is a Digital Asset. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***
Plasma Table Friendly - This means that the component is designed with no bends, all flat plate. This makes the cutting and assembly very easy for anyone with a plasma table. Specific steps are required (follow the WPO) to ensure the strength is kept with this component.
Specifications
| Platform | Universal / platform-agnostic |
|---|---|
| Part Family | Spring Perches / U-Bolt Eliminator Kits / Spring-Under Kits |
| Position | Rear suspension |
| Build System | Leaf spring / spring-under |
Frequently Asked Questions
These are set up to work on various housing sizes, so they cover a range of common leaf spring builds. If you've got a specific housing diameter in mind, shoot us an email and we'll confirm they'll work for your setup before you buy.
They're designed Plasma Table Ready — all flat plate, no bends in the cut file itself. There is some easy bending by hand involved during assembly, and you'll want to follow the included WPO so you keep the strength in the part.
This is a digital download — you're getting the DXF cut files only, not a physical part. You run them on a CNC plasma, laser, or waterjet, then bend and weld them into your build. If you need a shop to cut them for you, email us and we'll point you to one.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 3.5 INCH LOW PRO LEAF SPRING PERCH is $8.00.
This 3.5 INCH LOW PRO LEAF SPRING PERCH is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Plasma Table Ready 2.5" Perches from Deuling Design plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Plasma Table Ready 2.5" Perches from Deuling Design category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Spring Perches, including Plasma Table Ready 2.5" Perches from Deuling Design, all designed by working fab shops. Browse the Spring Perches section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
