3.5" Exhaust Exit Plate from BakerFAB

It's set up for a 3.5" exhaust exit, so it's sized to clear a 3.5" pipe. If you're running a different diameter, shoot us an email and we'll see if Baker Motorsports has another file that works for your setup.

These are DXF cut files, so you pick the material thickness when you have them cut. For an exit plate most guys run sheet steel and weld it into the body or bed panel — if you want a specific recommendation, email us and we'll point you the right direction.

Yep, this is a digital download — after payment you get the DXF cut file to run on your plasma, laser, or waterjet. Nothing physical ships, you have it cut yourself or send it to a shop. We can recommend a cutter if you need one, just email us.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 3.5" Exhaust Exit Plate from BakerFAB is $8.00.

This 3.5" Exhaust Exit Plate from BakerFAB is brought to you by Baker Motorsports. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models, Superioroffroaddesigns and Velocity Fab. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Exhaust Components plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Exhaust Components category, or shoot us an email and we will point you to the right files for your build.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.