105-JLF-001-1.75-7.5-70
Frequently Asked Questions
Yep, these are set up for 1.75" round tubing. The numbers refer to the notch geometry, so if you're running 1.75" tube in your chassis these are the right guides for you.
These are 3D printable "potato chip" notch guides, so they're meant to be printed, not cut on a plasma table. You print the guide and use it to mark and notch your tube before you weld it in.
This file is set up for the specific tube size and angle in the part name. If you need a different angle or a different tube diameter for your build, shoot us an email and we'll see what other guide files we've got that'll work.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 105-JLF-001-1.75-7.5-70 is $4.00.
This 105-JLF-001-1.75-7.5-70 is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for 1.75" Round Tubing plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 1.75" Round Tubing category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across 3D Printed "Potato Chip" Notch Guides, including 1.75" Round Tubing, all designed by working fab shops. Browse the 3D Printed "Potato Chip" Notch Guides section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.