Stage 2 Race/Play Roller Chassis from Tekk

In stock
This Tekk T3 Chassis assembly is designed to be cut from 4130 Chromoly and TIG welded. Fabrication experience is required seeing that the components are more complex than the Stage 1 packages.

Designed for TIG welding these parts are a level of complexity above Stage one, both stronger and lighter in weight.

***Due to the complexity of these assemblies a representative from Tekk Consulting LLC will be reaching out to you personally upon purchase***
Each DIY Chassis package comes with the following Cutfiles:

Tube chassis cutting files for a tube laser, Front suspension assembly, Rear suspension assembly including rear end housings (3.5″ and 4″), Bulkhead/floor/rear pivot boxes, shock mounts, bump stop mounts, and rear sway bar assembly.

EASM files of the chassis and all suspension components are also provided to aid in assembly/fabrication of the truck.

Chassis: This chassis is designed out of various material diameters and thickness, mostly .120 wall and .095 wall for ease in MIG welding. The DIY series of trucks are SCORE/BITD race legal.

We have three chassis options available:

Midsize/7200 – This platform will fit up to an LS3/7 and is 118″ wheelbase by 85″ trackwidth.

Fullsize (lite) 6100 – This platform is designed for 6100 racing and is 120″ wheelbase by 90-91″ trackwidth

Fullsize Trophy Truck – This platform is designed for Trophy Truck racing and is 125″ wheelbase by 94″ trackwidth.

Y-Frame: The section of the chassis that locates the front and rear suspension including the floor. This Y-Frame is designed to be fabrication friendly with snap together construction and tooling/fixtures for the entire Y frame

Suspension: This package includes Stage 2 suspension from Tekk, boxed arms and links that are designed to be cut from 4130 and MIG or TIG welded. The Stage 2 components are lighter and stronger than Stage 1 components, perfect for a race tuck platform.

Fuel Cell and Spare Tire Setup – The Stage 2 trucks utilize custom fuel cells that are fit to the chassis. We have various options for fuel cell size/location/style that will fit your preference.

Rear End Housing Setup – Each DIY truck comes with 3.5 and 4″ housing files but the trucks will fit a variety of rear end housings from Camburg, BMS, Currie, Tubeworks, ID, and others.

Fixture/Tooling - The Stage 2 Chassis and Components are designed with fixtures that are included in the cutfiles and EASM files. The tables are also included, one component table and larger chassis tables (same bolt pattern). The chassis comes with fixture files as well, these locate the Y frame on the table, the main tubes for the chassis, and the shock pivots.

***This product is a Digital Asset, you are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***
Write Your Own Review
You're reviewing:Stage 2 Race/Play Roller Chassis from Tekk
Your Rating
Copyright © 2021 DIY Offroad, Inc. All rights reserved.